Cantilever design, high safety and security standard, fully preassembled
Hörmann sliding gates made of sturdy steel profiles are supplied as a complete element with an opening width of up to 12 metres. Using two systems working in opposite directions, it is therefore possible to achieve a width of 24 metres. The construction is self-supporting. The benefits: minimum foundation work. no ground track installation, ice and snow or even heavy soiling will not affect the smooth operation of the gate.
Two gate types
Depending on the gate construction, the lightweight or heavyweight version is used.
Lightweight version:
Type HS 160 standard
Height of bottom cantilever 160 mm, overall thickness 165 mm
Type HS 200 standard
Height of bottom cantilever 200 mm, overall thickness 165 mm
Heavyweight version:
Type HS 200 Industry
Bottom cantilever 200 mm, overall thickness 165 mm
Type HS 280 Industry
Height of bottom cantilever 280 mm, overall thickness 200 mm
Type HS 380 Industry
Height of bottom cantilever 380 mm, overall thickness 200 mm
Clear passage width up to 15 metres.
Leichte und schwere Torkonstruktion im Vergleich
Always perfectly aligned
Pretensioning of the gate leaf construction reduces the risk of bowing. The gate leaf is precisely aligned in the gateway.
HSA electric operator on request
With dead man's or impulse control. Fitted into the bottom cantilever, protected from the weather and concealed from view. Frictionally engaged power transmission, free from play, low-maintenance worm gear with frame-mounted 3-phase current motor disengagement for manual operation. Supplied already fitted, operator and control unit prewired, control box or cabinet designed as a water-tight unit.
Elektro-Antrieb HSA
|
|
Choice of colours to RAL
The following colours based on the RAL colour chart are available: - RAL 6005 Moss Green
- RAL 7016 Anthracite Grey
- RAL 7030 Stone Grey
- RAL Pebble Grey
- RAL 9010 Pure White
- Special colours on request
Farben nach RAL
|
|
|
