Fully compatible for greater convenience and lower costs
If the garage door, entrance gate and entrance door are from Hörmann, you can operate both using the one hand transmitter You don't require any additional receiver, nor do you have to worry about coordinating the operator systems of different manufacturers. This not only saves time and money - but is less nerve-wracking too!
|
|
|
Hand transmitters
With the hand transmitter you can operate the garage door and, for example, also the entrance gate and outdoor lighting (separate Hörmann receiver required). A 2-button hand transmitter with holder is a standard feature. On request, you can also obtain the hand transmitter with four buttons, in a mini size and also as a 2-button micro version with key-ring. Hörmann hand transmitters are impact-resistant and operate on the 868.3 MHz radio frequency, currently the best alternative among all the approved radio frequencies.
|
|
|
|
Easy transfer of the security code
Each operator is individually precoded at the factory. You can easily transfer this code to other hand transmitters yourself. This conveniently allows the garage door to be opened by other members of the family
|
|
|
Code modulator with illuminated keys
Especially convenient in the dark. Code modulators are wireless. So you don't have to worry about laying cables One code modulator will operate up to ten automated doors.
|
|
|
|
Digital coders
Digital coders offer a high level of security against would-be intruders. You simply enter your own personal combination code and a key is no longer needed. With the deluxe version you can open and close a second door or gate as well as switch on the outdoor lighting.
|
|
|
Transponder key switch
The convenient solution when the garage is used by more than one person. You simply hold the coded transponder key approx. 2 cm in front of the reader. A no-contact system! Particularly advantageous in the dark.
|
|
|
|
Key switch
As recesssed versions for setting into the wall and as surface-mounted versions for screwing onto the wall. All four key switches are suitable for impulse action. Where two doors are positioned adjacent to each other, one key switch is sufficient.
|
|
|
Receiver
If you want to use your hand transmitter to additionally switch on outdoor lighting and, for instance, open an entrance gate (other brand), then you require a relay receiver with 1, 2 or 4 channels.
|
|
|
|
Flush-mounted radio transmitter
For all standard 55 m diameter switch boxes. Ideally, installed centrally in the hall or living room within sight of the garage door. Via the two functions you can control your garage door and in addition, for example, the outdoor lighting, the pond pump or the Christmas tree lights on the patio.
|
|
|
Photocell
Vehicles and persons are detected immediately. This rules out collisions and provides a level of safety that particularly families with children appreciate.
|
|
|
|
IT1 interior push-button unit
Installed inside the garage or in the hall within sight of the garage door.
|
|
|
Emergency release
This is an important feature in the event of a power failure, especially if your garage does not have a second entrance. Then you can unlock your garage door (up-and-over, sectional or hinged door) via an external handle with Bowden cable or directly via the emergency release lock.
|
|
|
|
|
Download
