Where loading takes place around the clock, Hörmann DTS dock seals prove the ideal choice on account of their particularly high-grade flap material. As a dock-height or roadway version (see pictures below) they are predestined for lorries of all sizes.













High tear and abrasion-resistance
Side flaps and head flaps are made of polyester with a special woven inlay and feature integral galvanized steel leaf springs/stays.
Everything is high-frequency welded and not, as in most cases, just sewn!
This gives the flaps a high degree of elasticity and an outstanding tear and abrasion-resistance.

With link or scissor arms
The DTS dock shelter is designed for flexibility and, as with the DSL type, is supplied with link or scissor arms. The dock-height version is always equipped with scissor arms.




Special versions
On request, it is also possible to supply a rigid construction or one for fitting into recesses.

Design and quality features
Three-sided front and rear frame with frame connection (link or scissor arms) made of galvanized steel profiles.
Roof shaped with 50 mm peak
Flap fastening via screwed corner angles in the form of natural anodized aluminium extrusions (E6/EV1).

Head flap
From 1000 mm with wind set and 2 marker stripes
Side flaps
Each with 4 marker strips per side
Top cladding
With integral rain gutter
Corner sealing cushions
Black, both at the bottom of the side flaps

Standard sizes

(Dimensions in mm)
	Width	Height	Depth	Front opening		Head flaps length	Side flaps width
	(W)	(H)	(D)			(KP)	(SP)
Dock-height version DTS-L/DTS-S	3500	3500	500	2200	1000	1000	650
Roadway version DTS-S-G	3500	4500	500	2200	3500	1000	650
Types DTS-L, DTS-S and DTS-S-G on request also in other head flap lengths and side flap widths. Types DTS-S and DTS-S-G also in extra-deep sizes. Special sizes on request. Dock height (RH) after prior consultation

For more information and details pleasedownload the brochure.